|
|
|
Home > Hamilton Beach Apliance Parts
Hamilton Beach Blender Rubber Drive Clutch
|
|
Part: HA-075
Price: $2.95
|
| |
|
Hamilton Beach Blender Replacement Rubber Drive Clutch. This is the rubber drive located on top of the motor. Connects the motor to the blade assembly. Fits all Hamilton Beach home blenders including but not limited to models 50120, 50125, 50152, 50199, 50200, 52254, 54150, 54250, 54255, 56150, 56400 and 56406. Also fits commercial blender models 908, 909, 918 and 919. Because of the direction of rotation of the motor, the threads are left-handed (tighten and loosen in the opposite direction of conventional nuts and bolts.
|
Average Customer Review:  26 Reviews
|
|
Exactly what I ordered ..... Thank you., 11.9.2011
|
|
Reviewer: Dave (Twin Falls, Id., )
|
ordered, received, happy....
Pros: See Product Review
Cons: None
Best Uses: See Product Review
|
|
|
Great Product, Fast Shipping, 10.6.2011
|
|
Reviewer: Paul Des Plaines (Des Plaines, IL, )
|
Great product, fast shipping and good price. Thanks.
Pros: See Product Review
Cons: None
Best Uses: See Product Review
|
|
|
Awesome. Happy to have found this site., 9.23.2011
|
|
Reviewer: boatwoman (Woodbridge, VA, )
|
Products were all useful. Everythi10/09/11
|
|
|
, 9.15.2011
|
|
Reviewer: Big D in AZ (arizona, )
|
What can I say it's a blender part. Works fine
Pros: See Product Review
Cons: None
Best Uses: See Product Review
|
|
 no instructions on how to install, 7.21.2011
|
|
Reviewer: llosan7533 (sneville,ga., )
|
really thought i hit the jackpot with rep part,but when it came there were no instructions for installation and i have not been able to use it
Pros: None
Cons: No instructions 4 install
Best Uses: None
|
|
|
Great Product, 7.13.2011
|
|
Reviewer: fl tex (Kerrvillle, TX, )
|
the shaft has left handed threads.
Pros: Inexpensive repair
Cons: No installation help
Best Uses: Repair blender
|
|
|
fits perfectly, 5.13.2011
|
|
Reviewer: Happy (Oak Park,IL, )
|
The replacement clutch fit perfectly and works great. This is better than buying a new blender.
Pros: It works great, The clutch fit perfectly
Cons: None
Best Uses: See Product Review
|
|
|
Works perfectly, 5.12.2011
|
|
Reviewer: kyle (MA, )
|
Great for ice crushing and smoothies
Pros: See Product Review
Cons: None
Best Uses: See Product Review
|
|
|
Small indispensable part -- Big savings, 5.12.2011
|
|
Reviewer: A Texas re-cycler (Houston TX, )
|
It's the little things that cause many people to 'dump' good appliances. When the blender froze in the middle of operation, I was told--"Just buy a new one. It's cheaper than getting it fixed." Wrong. For less than it would have cost to drive to the s
|
|
|
Just what it says. . ., 4.12.2011
|
|
Reviewer: Mac the Knife (Ft. Collins, CO., )
|
Got it in the mail, stuck it on and it worked great. (had to get creative a bit to hold the motor shaft while trying to remove the old part that got the teeth stripped off of it when the carafe was not fully seated in place on the motor base). Keep in min
|
|
View all 26 reviews
|
Customers who bought the
Hamilton Beach Blender Rubber Drive Clutch also bought:
|
Hamilton Beach Blender Gasket
Blender Jar Gasket. Fits most domestic models of Hamilton Beach blenders. Does not fit models 908, 909, 911, 939, 990, 50100, 50188, 50199, 50286, 54100, 54101, 54104, 57100, 57122, HBB250 or HBB250S. Inside diameter approximately 1 7/8 inches. Outside diameter approximately 2 3/4 inches. This may also fit some older Sears Kenmore blenders.
|
$1.01
|
|
Hamilton Beach Blender Cutter Blade
Hamilton Beach Blender Cutter blade fits all Hamilton Beach home blenders. Except Wave Station blender models. (Does not include the gasket)
|
$5.95
|
|
Hamilton Beach Jar Bottom Cap
Hamilton Beach Blender Jar Bottom Cap - (base piece that connects the cutter and gasket to jar)
|
$2.95
|
|
Hamilton Beach Blender Stainless Steel Cutter
Hamilton Beach Blender Stainless Steel Cutter. Fits domestic blenders as well as commercial models.
|
$9.99
|
|
Hamilton Beach Plastic Blender Jar
Hamilton Beach 44 ounce plastic blender jar. Fits all Hamilton Beach blenders, except Wave Action models.
|
$6.95
|
|
|
|
