|
|
|
Home > Hamilton Beach Apliance Parts
Hamilton Beach Plastic Blender Jar
|
|
Part: HA-030
Price: $6.95
|
| |
|
Hamilton Beach 44 ounce plastic blender jar. Fits all Hamilton Beach blenders, except Wave Action models.
|
Average Customer Review:   15 Reviews
|
|
hamilton beach plastic blender jar, 11.9.2011
|
|
Reviewer: no nickname (Fayetteville, NC, )
|
use mainly for making smoothies
Pros: This was a replacement
Cons: None
Best Uses: See Product Review
|
|
|
Not good, 4.15.2011
|
|
Reviewer: rt the elder (St Louis, MO, )
|
was not properly sized for Hamilton Beach although it is advertised that it does. Neither the base nor the lid fit.
Pros: None
Cons: Didn't fit threaded base, Didn't fit lid
Best Uses: RETURN IT
|
|
|
Better buy a lid,the old one won't fit!!, 4.4.2011
|
|
Reviewer: YAHTZOMAN (NY, )
|
It replaced original glass one I broke. It was smaller than original. Thankfully I read the product comments of others before purchasing to find out the original lid will NOT fit
Pros: See Product Review
Cons: None
Best Uses:
|
|
|
Blender Jay, what can I say, 3.14.2011
|
|
Reviewer: Googe (Pasadena, CA, )
|
Too bad it does not ship with a lid, this was a (plastic) replacement for a glass jar that broke on our old blender, and unfortunately the old lid does not fit.
Pros: See Product Review
Cons: None
Best Uses: See Product Revi
|
|
|
replacement blender jar, 3.11.2011
|
|
Reviewer: Zola (Kentucky, )
|
part is perfect There is no problem at all with the product.
Pros: RECEIVED PART QUICKLY
Cons: Non07/22/10
|
|
|
Original lid is too large for replacement, 3.11.2011
|
|
Reviewer: bummer (Texas, TX)
|
The replacement blender jar is too small for the original lid. I have to hold it in place.
Pros: See Product Review
Cons: Orig lid does not fit
Best Uses: See Product Review
|
|
|
Blender jar fit perfectly, 9.21.2010
|
|
Reviewer: Granpa (San Antonio, TX)
|
Works as expected
|
|
|
Does not replace 8 cup blender Jar., 9.14.2010
|
|
Reviewer: bobby (atlanta, ga, atlanta, ga)
|
Not a true replacement of the blender jar supplied with the original product
Pros: Not a true replacement, Much lower capacity, Parts fit but the Jar is, Is to small for the lid
Cons: None
Best Uses: See Product Review
|
|
|
Not happy, 9.8.2010
|
|
Reviewer: Artystyc3 (Coral Springs, Fl., FL)
|
The plastic was supposed to replace the glass jar-( and no, I don't own the wave Action model) but on mine the original top did not fit on the replacement
Pros: See Product Review
Cons: None
Best Uses: See Product Review
|
|
|
, 8.17.2010
|
|
Reviewer: kh63 (Redding, CA, Redding, CA)
|
I wanted to keep my older Hamilton blender because it was built so well and has served me well for so many years
Pros: Hamilton Beach
Cons: None
Best Uses: Blenders
|
|
View all 15 reviews
|
Customers who bought the
Hamilton Beach Plastic Blender Jar also bought:
|
Hamilton Beach Blender Gasket
Blender Jar Gasket. Fits most domestic models of Hamilton Beach blenders. Does not fit models 908, 909, 911, 939, 990, 50100, 50188, 50199, 50286, 54100, 54101, 54104, 57100, 57122, HBB250 or HBB250S. Inside diameter approximately 1 7/8 inches. Outside diameter approximately 2 3/4 inches. This may also fit some older Sears Kenmore blenders.
|
$1.01
|
|
Hamilton Beach Plastic Blender Jar Lid & Cap
Hamilton Beach blender jar lid and cap fits all Hamilton Beach plastic blender jars
|
$5.95
|
|
Hamilton Beach Jar Bottom Cap
Hamilton Beach Blender Jar Bottom Cap - (base piece that connects the cutter and gasket to jar)
|
$2.95
|
|
Hamilton Beach Blender Cutter Blade
Hamilton Beach Blender Cutter blade fits all Hamilton Beach home blenders. Except Wave Station blender models. (Does not include the gasket)
|
$5.95
|
|
Hamilton Beach Blender Rubber Drive Clutch
Hamilton Beach Blender Replacement Rubber Drive Clutch. This is the rubber drive located on top of the motor. Connects the motor to the blade assembly. Fits all Hamilton Beach home blenders including but not limited to models 50120, 50125, 50152, 50199, 50200, 52254, 54150, 54250, 54255, 56150, 56400 and 56406. Also fits commercial blender models 908, 909, 918 and 919. Because of the direction of rotation of the motor, the threads are left-handed (tighten and loosen in the opposite direction of conventional nuts and bolts.
|
$2.95
|
|
|
|
