 Just the part I needed w/o extras., 1.23.2011
|
|
Reviewer: NHQuilter (Brookline, NH, )
|
When our 14-yr-old vacuum started making odd noises, I checked the power head and saw that the bearings were worn out So I ordered these replacement parts, installed them, and it PURRS when it vacuums now! Other stores only sold a total bar assembly for f
|
|
 Brush roller bearing, 1.21.2011
|
|
Reviewer: Older and wiser now (Lebanon Tennessee, )
|
I ordered this to replace a ball bearing that had worn out I received a brass bushing to replace it The bushing slides over a splined shaft on the brush roller The splined shaft acts as a grinder to destroy the bushing [ ] It worked for a few times and th
|
|
|
part was easy to find, 6.7.2010
|
|
Reviewer: fixer (southern Wisconsin, southern Wisconsin)
|
was not expensive
Pros: Was easy to locate on the
Cons: Took longer than expected
Best Uses: See Product Review
|
|
|
won't work for all power heads, 3.17.2010
|
|
Reviewer: robb (indiana, indiana)
|
they said they fit all power heads I had to grind about 3/32 to 1/8 from the brass bushing and shoulder to allow fitment into slots with roller brush in place I believe the power head to have come with my ex20
Pros: See Product Review
Cons
|
|
|
must modify to fit model 2-1000 p.h., 3.17.2010
|
|
Reviewer: robb (indiana, indiana)
|
they said they fit all power heads I had to grind about 3/32 to 1/8 from the brass bushing and shoulder to allow fitment into slots with roller brush in place I believe the power head to have come with my ex20
Pros: Fit fine after grinding
|
|
